Safire
- SAFIRE - Configuration of SF-VIK001 (IP or 2-wire) from SAFIRE CONTROL CENTER
- Configuring the SF-VIMOD-KEY6 module for SAFIRE video door phones
- How to set up Safire IP Video Door Station Board to Open the Door from Mobile Phone
- Customizing contacts in module SF-VIMOD-DISP
- Wiring distance of SF-VIK004-S-2
- Adding People to the SF-VI127E-IP Device
- Slave monitor configuration on Android monitor
- Sub door station configuration via SCC Master board for any Safire 2nd Generation Video Door Station
- Add ringtone for Safire SF-VIDISPxxx monitor
- How to connect the lock and exit button of SF-VI112-IPW-xMF
- Adding people by face detection with SF-VI126E-IP
- Disable Voicemail on Safire Video Door Station
- SF-VI112-IPW-xMF - Call the Safire Control Center
- How to Configure the Safire SF-VIK004 2-Wire WiFi Video Door Station
- Wiring distance SF-VIK004-S-2
- Safire Slave Monitor Configuration
- Enable alarm inputs for SF-VIDISP Monitor
- Master-Slave Configuration SF-VI112-IPW-1MF
- HOW TO CONFIGURE CARDS IN SAFIRE SF-VI112-IPW-1MF VIDEO DOOR ENTRY SYSTEMS
- SF-VIK004-S-2 - Enable the second relay from monitor
- RTSP - Adding a SAFIRE 2ndGEN Video Door Station via RTSP to a third-party NVR
- The image goes black when SF-VIK004-S-2 is called up
- Calling from SAFIRE SF-VI105E-IP to APP without monitor
- SF-VI104E-IP - With/without display operation
- How to use a camera with relay output simulating a Safire 2nd Generation Video Doorbell Touch Exit Button
- Connection diagram of an electric lock on Safire 2nd generation Video Door Station
- Configure 3 boards (VIMOD) with button panel (SF-VIMOD-KEY6) and 3 monitors (VIDISP) so that each button calls the desired monitor
- How to add an IP camera to a second generation Safire video door phone
- SF-VIDISP - Calls between SAFIRE screens
- SF-VI209M-IP - Master Station Configuration