To start the configuration, the following process will be carried out. The devices will be activated and the IP will be set.
The master station must be configured through the web and the master ID will be set in intercom, by default 51.
The period and number data will be filled in, only valid when there are multiple masters and you want to group them so that both are called; otherwise, leave it as default.
The IP will be configured within the LAN range where the master station will be installed.
If a second master is available, the same operation will be performed on it, only changing the number, in this case 52.
The IP will be set on the second board.
The session settings parameters will be configured and in videointercom server IP, the IP of the same master will be entered, in this case 172.18.210.64. Also, the second board will be added in device management and the call priority will be changed to 2.
The same configuration will be set on the second board.
Once this process is finished, the registration password and group call must be manually configured on the screen, so that both Master Stations are called.
In the next phase, the monitor and the outdoor panel will be added. To do this, enter the device's web server, click on Device Management and configure the devices to be added. You must fill in the device type, IP, device serial number, password, etc.
You must enter the monitor configuration through Safire Control Center and fill in the information regarding the room number, building, and enter the master's IP in the server IP window.
As for the outdoor panel, it will also be added in Device Management and once done, you must enter the configuration with Safire Control Center and configure the master's parameters.
Enter the session settings configuration and enter the master's IP
Afterwards, the call address of the panel must be changed so that it calls the master directly. Click on press button to call, change to template plan, and in the calendar change to call center all day.
