First the software will be installed and the Http and Https ports will be programmed. The Http port will be the one used to connect to the software.
You must enter the device menu, in the communications part, in connection to the cloud server or ADMS and configure the IP of the software and the Http port.
** NOTE** Do not leave the HTTPS button activated.
**NOTE** The hybrid devices (those with Access and Presence) must also be checked in the MENU - SYSTEM - DEVICE TYPE section to make sure that the terminal is configured as a presence terminal (T&A Attendance).
Once this process is finished, go to the software, go to the devices tab, click on the modify icon on the right, set an area that we have previously created and save.
Once the process is finished, it will be verified that the status of the equipment changes to green and we will be able to operate normally.