After filling in the APN information in the tracker, it is necessary to indicate the information of the server to which they will connect to send the data. In order for Teltonika equipment to communicate with the AIKO platform, the following procedure must be followed:
First, the tracker must be connected to the PC. This can be done in two ways:
1) Via USB: to do so, it will be necessary to install the "Teltonika USB communication driver", which can be downloaded from the following link (https://athena-visiotech.s3-eu-west-1.amazonaws.com/jXC1eYcBB1-tZqTHVjH0/TeltonikaCOMDriver.zip).
2) Via Bluetooth: the device with the name "FMx_last_7_digits_of_IMEI", without LE at the end, must be paired with the PC using the PIN 5555.
After that, download the Teltonika Configurator software (it can be found in the download section of the product) corresponding to the model in question and select the tracker.
In the GPRS --> Server Settings tab, the server, port and communication protocol will be specified:
For the different trackers, the data are as follows:
Protocol: TCP
Domain: d.aikotelematics.com
Port TK-FMB003/FMC003: 2730
Port TK-FMB130: 2587
Port TK-FMC130: 2585
Port TK-FMB140: 2570
Port TK-FMP100/FMT100: 2750
Port TK-FMB640/FMC640: 2720
Finally, click on the "Save to device" button to save the changes to the device.