Uniview decoders come with the factory IP 192.168.1.14 and password 123456.
Uniview decoders can be configured with EzStation software if used with Uniview computers
• Configuration of Uniview decoder via EzStation3.0
But if you want to add cameras by Onvif or RTSP you will have to use the EzWall.
Once installed, the EzWall will ask for the data of the decoder, IP, user and password:
Once inside, the first thing to do is create a Videowall by positioning the HDMI decoder in the quadrants and appropriate positions:
Then, the cameras will be added either by Onvif protocol or by RTSP, selecting it in the section of Protocol
For RTSP, the software itself has many manufacturers' codes and also Custom to specify a specific RTSP. Selecting Edit allows you to check the RTSP set for that manufacturer or for the Custom that has been selected
Once you have added the cameras, you can go back to the section of Video Wall to specify the quadrants that are wanted in each HDMI and which channels are going to be put in each of them:
These views can be saved, so that they can be executed at any time: