To add Safire Smart devices, the first thing to do is to enable P2P in the recorder, to do this you must access the Network-NAT section and set the status to "Success"
Next, download the Safire Smart APP and create a new account, either with the email or with a phone number and, to register the equipment, access the following section:
At this point, there are two ways to add a Safire Smart device by P2P:
- Security Code
- Serial Number
SECURITY CODE
To add the unit with this mode, you must indicate the serial number of the NAT section, as well as the security code that appears in the same section, by clicking on the eye icon to see it:
In this type of aggregation, the equipment is assigned to the first account where it is registered, so it will be the administrator and cannot be added to any other account with this method. To have this team in other accounts, the administrator will share the team with the other accounts
Authorization code:
As of Firmware Version 1.4.9, when equipment is added in a P2P account by the Security Code method, connecting to the devices via Autonat, an authorization code is requested.
This function serves as additional security and is automatically enabled by default for the administrator user. However, this function can be enabled and disabled in the following section of the recorder. However, it is important to know that it only supports 1 user which, for security, should be the admin user.
SERIAL NUMBER
Related FAQ´s
- Safire Smart – Safire Smart-Recorder über P2P für ein anderes Konto teilen
-
Safire Smart – Hinzufügen von NVR auf Mobilgeräten mit der Safire Smart Max App
-
Safire Smart Fernzugriff auf Webrekorder (autonat.com)Um Safire Smart-Geräte hinzuzufügen, müssen Sie zunächst P2P im Rekorder aktivieren. Dazu müssen Sie den Abschnitt „Netzwerk-NAT“ aufrufen und den Status auf „Erfolgreich“ setzen.
Next, download the Safire Smart APP and create a new account, either with the email or with a phone number and, to register the equipment, access the following section:
At this point, there are two ways to add a Safire Smart device by P2P:
- Security Code
- Serial Number
SECURITY CODE
To add the unit with this mode, you must indicate the serial number of the NAT section, as well as the security code that appears in the same section, by clicking on the eye icon to see it:
In this type of aggregation, the equipment is assigned to the first account where it is registered, so it will be the administrator and cannot be added to any other account with this method. To have this team in other accounts, the administrator will share the team with the other accounts
Authorization code:
As of Firmware Version 1.4.9, when equipment is added in a P2P account by the Security Code method, connecting to the devices via Autonat, an authorization code is requested.
This function serves as additional security and is automatically enabled by default for the administrator user. However, this function can be enabled and disabled in the following section of the recorder. However, it is important to know that it only supports 1 user which, for security, should be the admin user.
SERIAL NUMBER
For this method what is added in the application is the same serial number as above together with the user and password of the recorder, the admin or any other that has been created later:
With this type of addition there is no limitation of accounts in which the equipment can be added, it can always be added with the serial number, user and password.
Even if you have added the equipment to an account with the "Security Code" method, you can continue adding it to another account if you use the "Serial Number" method
Related FAQ´s
- Safire Smart - Sharing Safire Smart recorder with another account by P2P
- Safire Smart - Adding NVR on Mobile with Safire Smart Max App
- Safire Smart - Remote access to web recorder (autonat.com)