Note:
The test is performed on app version: V1.7.6 and iOS 15.2
Add the SF-SLFINGER-BT in the Cloud Smart Lock app
1. Open the Cloud Smart Lock app.
2. Click on the + sign in the upper right corner
3. Scan the QR code
4. Enter a name for the device and click Add
Then the device should appear in the application.
Add a fingerprint
1. Click on the device, the application will try to connect via BT must be within a 5 meter radius as close to the device as possible.
2. Open the fingerprint reader device in the app.
3. Select Fingerprint management.
4. Click on Add fingerprint to start
5. Wait for it to start (if it does not start retry or restart the phone)
6. Click start when it is visible. And follow the instructions.
6. Give a name to the fingerprint
7. The process is finished.
On the same page, you have the option to add another fingerprint or delete all fingerprints.
Linking the fingerprint reader with the smart lock
1. Open the fingerprint reader device inside the device you want to link with the smart lock.
2. Click on Link lock.
3. Select the lock with the reader to be linked.
4. When the link is successful, the connection symbol turns green with the message "Bind Success".
5. To unbind the device, select the device