False alarm filtering by coaxial PIR on this type of camera is configured from the Safire DVR's configuration menu.
Flash and siren deterrents are linkage actions that are programmed from the PIR filter detection tab.
Therefore, the PIR filter is first configured in the motion detection section of the recorder.
When the event is triggered by the detection, the deterrent effect is activated.
The relay output is activated within the linkage action subsection of the motion detection.
Also remember that it all depends on the type of interface the recorder has; whether it is the old or the new GUI4.0, where actions can be configured separately, the appearing tabs might be slightly different.
Next we leave an image taken from one of our Safire trainings in which we display a summary of the configuration possibilities depending on the recorder's firmware:
