🎥 Step 7: Camera configuration
- Log in
Log in via the NVR or directly via the camera's IP address in your browser. - Adjust image settings of Event Recording and Schedule Recording
Go to the Encode Parameters menu:- Resolution: Select the desired image quality.
- Frame rate: Adjust based on your storage capacity.
- Compression: Set to H.265+.
🎥 Step 8: Recording
Set recording schedule
Go to the Record menu:- Select Record mode Auto or Customized.
- Select the Schedule and Event recording (default: 24/7).
Auto
Customized
- Advanced Record settings
- Set up pre- and post-recording when using event-driven recording.
- Set the ExpirationTime
📸 Step 9: Snapshot settings in camera
- Activate snapshot
- An SD card must be inserted into the camera.
- Go to Storage --> Snapshot
- Turn on the schedule and select the type of snapshot (Event Trigger / Timing).
- Snapshot resolution and interval
- For Timing Snapshot: set interval to 1 hour (suitable for time-lapse).
- For Event Trigger: set the interval as short as possible for detailed images.