🛠️ Devices Used
🧙♂️Wizard
🧙♂️ Wizard
When the device starts, the Wizard helps you set it up quickly.
- Choose Language
- Set Time Zone (activate daylight saving if needed)
-
Date & Time Settings
- Use automatic or manual setup
- Choose date/time format
- Create Admin Password
- Accept Privacy Statement
-
Network Configuration
- Default IP is DHCP
- Manual IP recommended to avoid changes
-
Wi-Fi Setup
- Enable Wi-Fi if needed
- Select network and enter password
-
Door Station Setup
- Auto-search or manually enter IP
-
Sub door station Setup
- Auto-search or manually enter IP
📞Call Functions
Unblock
Manual recording; before starting recording, insert a micro SD card first.
Snapshot: before taking a snapshot, insert a micro SD card first.
📺Live view
On the home page, press "Live" to access the live view page as shown below.
You can select 4-screen display mode or single screen display mode, according to your needs.
Button description:
Tap to enter the single channel full screen mode.
Tap on it and enter the setup password to enter the device list interface. You can see the IP address of the added device. In addition, you can add, delete and modify devices on this page.
Manual recording; before starting recording, insert a micro SD card first.
Snapshot: before taking a snapshot, insert a micro SD card first.
Enable/disable two-way audio (the preview channel must support two-way audio, or this button will be hidden).
Enable/disable audio.
Unlock (the preview channel must be compatible with this function, or it will be hidden)
When more than 4 IPCs are added, you can press to change the preview. A maximum of 16 channels can be previewed.
Tap in the upper right corner to access the camera list page. On this page, you can view the images and IP addresses of the added cameras/gatekeepers. Touch a camera/gatekeeper to18 view its video as shown below
⚙️Device Management
- Tap Settings and then More Settings
- Settings (by entering the Admin password)
- Device Management
on the screen to access the device management interface.
- Press
to search for the master door station in the same local network. Press the IP address
- searched to add it.
- Press
to add a device. Enter the device name, IP address, data port, user name and password to add a device.
- Press
to search for connected devices on the same local network. Select a device and
- enter the login password to add it.
- For the searched devices, select a desired device, press
and enter the username and password to add; you can also modify the IP address by pressing
- For the added device, press
to remove it, press
to modify the relevant information.
- For added devices, if their IP address or port is changed, it is necessary to delete and re-add them again.