The necessary steps to install a SIP firmware in a X-Security Video-intercom, 3211 series are presented in the following article.
This procedure concerns devices XS-V3211E and XS-3211E-MB4.
If you have any doubts about how to use VDPConfig, please follow this FAQ.
Requirements
Check that the Video door phone has the version V3.200.0012001.0. (If not, please install it first).
1 - FIRST STEP
Download the SIP4 firmware pack FOR 3211 SERIES.
First install 1_FIRMWARE - 3211.bin
The device is going to reboot.
Now install 2_FIRMWARE - General_VTO3211D_Eng_P_SIP_V4.300.0000000.4
After the installation of the SIP firmware, we recommend resetting it to factory settings and reconfiguring it; the device will be inactive and will have to be activated from the VDPConfig.
XS-3211E-MB1
For the MB1 the procedure is the same but the firmware is different.
Firmware for the XS-3211E-MB1.