The tracking option is available for line crossing detection, region entrance and exiting
and intrusion detection.
Smart Tracking:
When people or vehicle cross the alarm line or intrude or exit the
predefined area, the PTZ camera will automatically track them and the target image will be
automatically zoomed in and centered on the screen until the target disappears on the screen.
After that, the PTZ camera will return to the tracking start position.
Tracking Mode:
PTZ Auto Tracking Priority or Manual PTZ Control Priority can be
optional.
PTZ Tracking Priority:
If this mode is selected, in smart tracking mode, you cannot control
PTZ by clicking the buttons on the PTZ control panel in the live view interface.
Manual PTZ Control Priority: if this mode is selected, in smart tracking mode, you can
control PTZ by clicking the buttons on the PTZ control panel in the live view interface and
then the camera will immediately stop the tracking action. After you finish controlling PTZ
for 5 seconds, the PTZ camera will return to the start tracking position and wait for the object
to appear.
Still time:
If it is enabled and the time is set, when the target stops or hides behind an obstacle,
or the target tracking is complete and there is no target appearing in the detection area during
the set time, the PTZ camera will return to the tracking start position. Of course, during this
time, if there are targets moving, the PTZ will continue tracking. If it is not enabled, when the
target stops or there is no target appearing in the detection area for 5 seconds, the PTZ camera
will return to the start tracking position.
How to set smart tracking:
1. Click Config > Alarm > Smart Tracking to go to the smart tracking interface. Select the
tracking mode and set the still time as needed.
2. Click Config > Event. Select the event as needed. For example intrusion, enable the
intrusion detection, select detection target and then check “Trigger Track”. After that
click “Save” to save the settings.
3. Set the alarm area and Unlock the PTZ. (depending on the other settings)
Using the PTZ control buttons (area①) sets appropriate field of view and then draw the
detection area and save the setting.
After that, click the “Lock” button to save the current PTZ position as the start tracking
position). Now, the “Lock” button changes its function to “Unlock”.
Note: Clicking the “Unlock” button suspends object tracking until you click the “Lock”
button. If you want to change the start tracking position, you can click “Unlock” button
to enable PTZ control. After that, please remember to lock the PTZ, or object tracking
will not take effect.
4. Go back to the live view interface to view smart tracking.
Image NVR :