Here’s a compact explanation of how to quickly set up a SF-VI131-IPW-MF door station, a SF-VIDISP11-7WIP monitor, and receive calls on a mobile device.
Requirements
- Outdoor station: SF-VI131-IPW-MF
- Monitor: SF-VIDISP11-7WIP
- PoE switch: SF-SW0604HIPOE-60
- Laptop or PC (for configuration)
- Smartphone (for mobile access)
- Software: IP Manager Tool (downloadable via Safire’s Download Center)
- Safire Smart app (available in the Play Store)
Step-by-Step Installation
1. Connect the Hardware
- Connect all devices to the PoE switch.
- Use the uplink port to connect the switch to your router.
2. Configure the Outdoor Station
- Open the IP Manager Tool on your Windows computer.
- Locate the SF-VI131-IPW-MF outdoor station.
- Go to the Activation tab.
- Set a new password and click Activate.
- Go to the Batch Set Net tab.
- Check Obtain IP Automatically (DHCP).
- Click Batch Set to apply.
3. Configure the Monitor
- Turn on the SF-VIDISP11-7WIP monitor.
- Follow the setup wizard:
- Choose and save your language.
- Set the time zone.
- Accept the privacy policy.
- Set the IP mode to DHCP.
- Skip the Wi-Fi setup for now.
- If using multiple monitors (maximum 6 per apartment):
- Set the first one as Indoor Station.
- Set the others as Indoor Station Extension.
- Assign the correct apartment (room) number.
- Tap OK to search for and connect to the door station and other cameras on the network.
4. Mobile Integration
- Install the Safire Smart app on your smartphone.
- Create an account or log in.
- Use the menu in the top right corner to register the video intercom.
- Then in the same place to choose the option to scan.
- Tap Add device.
- Scan the QR code on the back of the outpost or use the configuration page.
- Tap Add (Add) to complete.
The device now appears in your server list and you can receive calls on your mobile.