When the keyboard starts, the first thing it asks for is the password, by default it is 123456.
The menu when accessing is as follows:
- To enter the settings menu, the SETUP button on the keypad will be used:
The ENTER key is used to access each submenu and the ESC key is used to return to the previous menu.
- The IP configuration is done in System Setup - Network
- To add IP cameras, access the IP Dome Setup menu. Press ENTER on the line of the camera to be configured and set the camera data. The keypad supports Safire Smart cameras (Private protocol) and Onvif cameras:
The keyboard only supports "." and "," icons, so passwords can only have one of these two symbols
- If the camera is connected via RS-485, the camera data is set to Serial Port Mode.
- Once the cameras have been added, it is necessary to specify on the keypad the operating mode it will have, whether it will control IP cameras (IP Dome Mode) or by RS-485 (Serial Port Mode).
When IP Dome Mode has been selected, you can return to the initial menu, where the Inquire button will display the list of added cameras, select the desired one with Enter, and start controlling it.