It is possible to access an NVR or XVR from Safire Smart directly.
How does this work?
NAT services must be active, and a username and password must be available.
This works with MS Edge in Internet Explorer modes.
Setting up NVR/XVR
1. Open the configuration page of the NVR/XVR.
2. Then Network
3. Select the NAT tab
4. Enable the service
5. Click on Apply
Connect to the NVR/XVR
1. Open the MS Edge in Internet Explorer modes
2. Add the NVR/XVR serial number
3. Username and password and Login