Safire Smart XVR - How to use the spot monitor?
The series HQ and HU have a BNC spot monitor connector.
By default, the BNC video out will display the same as the HDMI and VGA video out signal.
How to enable the Spot monitor?
Open the start menu and click on Settings
Then click on Basic
This will show the General settings.
B. Basic > General settings
C. Enable the Spot monitor
D. Then Apply the settings
Adding the cameras to display on the spot monitor
A. Open the Output Settings
B. Select the output 2
C. Click on the Plus icon to add a new window for the spot monitor
D. Double-click on the camera to add in the field
F. Select the Dwell Time
G. Then when ready Save click on Apply
The max windows to add for the spot monitor is the limit of the recorder max channels. Sample: a 4+2 IP = max 6 windows.
It is also possible to add a camera more than one time, and the dwell time is for all the cameras.