The AC105 devices can be deconfigured because another administrator code has been wrongly selected or simply because they are deconfigured with respect to their use.
It is necessary to distinguish between the two types of devices that will be found.
AC105 12-wire
8-wire AC105.
The 12-wire AC105 is reset as follows:
- It is disconnected from the mains
- Connect the two pink wires.
- Switch on the device.
- You will hear a double beep ( beep beep beep) and the led does not light up
- Separate the pink wires. The led stays green
- The add card and then the delete card are added in order. Only one of each card can be added.
- (If no card is swiped, the previous master cards will be kept)
- (If you wish to delete the user cards already added: press: *999999# 2 0000# )
- The light keeps flashing but the device is now working properly.
- The device is already reset.
- Check for correct operation.
Master cards cannot be added via the remote control, however, user cards can be added (deleted).
The AC105 8-wire device is reset as follows:
- It is disconnected from the mains
- Connect the yellow wire together with the black wire
- Switch on the device.
- You will hear a double beep ( beep beep beep) and the LED lights green
- Separate the yellow and black wires
- If you keep the light constant, it is already working properly. If you want to reset completely it is necessary to do the following steps
- Delete all users.
- press: *999999# 2 0000# (All added users will be deleted)
- Set as reader:
- press: *999999# 3 13#
- Set as standalone:
- press: *999999# 3 11#
- Delete cards added:
- press: *999999# 2 10001#* (Admin cards are deleted adding others)
- Delete deleted card:
- press: 999999# 2 10002# (Admin cards deleting others will be deleted)
- Add cards addition
- press: * 999999 # 1 10001 # pass the card * (It is added as an enrollment card)
- Add cards deleting
- press *999999# 1 10002#swipe card* (Add as erase card)
- Check the correct operation.
To add master cards to this 8-wire device, you have to do it through the remote control. Then these cards can be added as user cards or be added by the remote control.