In this article we explain several ways to configure different maps.
Mode 1: create a map from a GIS
First we open the web server to configure it. From the settings part we can generate a map from a GIS file, as shown in the following screenshot:
Then, we go to the Logical Visualization part to define which groups of cameras we create and where we will place them.
To add a camera to the map, select the camera and the following configuration menu will open:
We select the icon we want (we can also import one), and we will click save. Then the camera will appear on the map.
In this way we could create a general map with the devices we want. We click on 
so that the changes are applied in the Safire Central Control Client and we go right to the Control Client that we just mentioned.
We click on the map that appears in the Safire Central drop-down part to the left of the screenshot, and the map with all the devices that we have configured before will appear in the main part from the web server interface:
Here we can receive the alarms in real time and view the cameras at the time we want.
Mode 2: create individual map
First, we select the group on which we will configure the map:
We enable the map option, we load an image and we give it to save:
Next, we select each device and enable the map option as we have done previously and click save:
And the devices will appear on the map:
Now we go to the Safire Central Control Client, and update the changes as we have done before:
We kunnen zien dat we in de groep van verdieping 1 nu ook een MAP hebben, we kunnen deze selecteren en deze verschijnt op het hoofdscherm:
IMPORTANT: a camera cannot be associated with two different maps (it cannot be associated with a GIS map and an individual map at the same time). If it is selected in the general map, it cannot be associated with another. Similarly, if it is associated with an individual map, it cannot be associated with a general map.